Forum Replies Created

Viewing 15 posts - 1 through 15 (of 82 total)
  • Author
    Posts
  • in reply to: Excel Essentials – Navigate with the keyboard #324921
    Niklas
    Keymaster

    Hi,

    Fair point; not everything directly translates to Mac. Check the provided list below.

    • Select Column: Command + ^. This shortcut selects the entire column of the active cell.
      Last Populated Cell: There isn’t a direct shortcut to jump to the last populated cell in Excel for Mac like there is in Excel for Windows (Ctrl + End). But to my recognition, you can use a combination of shortcuts and actions to navigate towards the last populated cell. One way is to press Control + Arrow key in the direction you want to move (right for the last populated cell in a row, down for the last populated cell in a column), which will take you to the edge of the data region. This isn’t foolproof if there are empty cells in your data, but it gets you close.
    • Next Populated Cell: Similarly to finding the last populated cell, you can use the Control + Arrow key shortcut to jump to the next populated cell in any direction. If you’re in or adjacent to a block of populated cells, pressing Control + Arrow key will jump to the edge of that block in the direction of the arrow key you pressed. If there’s a gap between the cells, it will jump to the next populated cell past the gap.

    Consider this: Excel shortcuts can vary slightly based on the version of Excel and the Mac OS you’re using, so it’s a good idea to check if these shortcuts work as expected on your specific setup or if there have been any updates.

    Let me know if this doesn’t work.

     

    Kindly,
    Niklas at Learnesy

    • This reply was modified 1 week, 1 day ago by Niklas.
    in reply to: Excel Basis – Kopier formler #317761
    Niklas
    Keymaster

    Hej Jane,

    Vad jag kan se så är det inga fel. Kanske kan du prova igen?

    Allt gott,
    Niklas på Learnesy

    in reply to: Kört fast i logiska funktioner #311965
    Niklas
    Keymaster

    Hej,

    Nej, du ska inte behöva låsa formeln på något sätt. Utvärdera sedan antal “SANT”.

    /Niklas på Learnesy

    in reply to: Kört fast i logiska funktioner #311852
    Niklas
    Keymaster

    Hej,
    Jag förstår!

    En ledtråd: i den här uppgiften har vi tre villkor och samtliga måste vara sanna. Du behöver endast en funktion för att utvärdera dessa villkor.

    Kan du komma på vilken?

    /Niklas på Learnesy

    in reply to: Kört fast i logiska funktioner #311839
    Niklas
    Keymaster

    Hej Fidji,
    Du kanske kan beskriva hur långt du har kommit / vad du har försökt med för att lösa uppgiften så kan jag vägleda dig vidare därifrån.

    / Niklas på Learnesy

    in reply to: Problem att öppna introduktions filmer #311318
    Niklas
    Keymaster

    Hej Saithong,

    Hör av dig till [email protected] och bifoga en skärmdump på problemet.

    Allt gott,
    Niklas på Learnesy

    in reply to: Prov – Importera data med Power Query #309863
    Niklas
    Keymaster

    Hej Houda,
    Vilken fråga är detta?

    /Niklas på Learnesy

    in reply to: Power Query Bas – Hämta data från en mapp #304502
    Niklas
    Keymaster

    Hej Reyna,

    Nej, inte nödvändigtvis! Detta underlättar ju dock i många fall. Men det finns egentligen inget som hindrar dig från att importera filer som inte innehar samma data-/tabellstruktur.

    Allt gott,
    Niklas på Learnesy

    in reply to: Text i kolumn #292785
    Niklas
    Keymaster

    Hej igen Houda,
    Den här formeln i B1 kommer också fungera:

    =LET(b;VÄNSTER(A1;LÄNGD(A1)-1);c;HÖGER(A1;1);HSTACK(b;c))

    Lycka till!
    /Niklas på Learnesy

    • This reply was modified 3 months ago by Niklas.
    in reply to: Text i kolumn #292774
    Niklas
    Keymaster

    Hej Houda,
    Okej, då föreslår jag att du att du gör som följande:
    Skapa en kolumn med formeln =VÄNSTER(A1;LÄNGD(A1)-1), och en till med formeln =HÖGER(A1;1).

    Detta är min bästa lösning just nu. Jag skriver om jag skulle komma på något mer sofistikerat.
    /Niklas på Learnesy

    in reply to: Text i kolumn #292755
    Niklas
    Keymaster

    Hej Houda,
    Okej, då tror jag att jag förstår. Jag skulle prova med denna formel:

    =HÖGER(A1;SEKVENS(;1))

    Låt oss säga att vi har namnen “HOUDA”, “NIKLAS” och “MARCUS” i cell A1:A3. Skriver vi då in formeln ovan i cell B1 och fyller nedåt så kommer formeln returnera
    “A”, “S”, “S”.

    • This reply was modified 3 months ago by Niklas.
    in reply to: Text i kolumn #292730
    Niklas
    Keymaster

    Hej Houda,
    Om jag förstår dig rätt så vill du behålla samtliga bokstäver i en cell men ta bort den sista?
    Formeln nedan kommer returnera “HOUD”. Här kan du byta “HOUDA” mot en cellreferens istället.

    =VÄNSTER(“HOUDA”;LÄNGD(“HOUDA”)-1)

    Löser det här dina problem?
    /Niklas på Learnesy

    in reply to: Dela cell diagonalt #292113
    Niklas
    Keymaster

    Hej,
    Jag tror att enklaste sättet är att infoga en likbent triangel. Detta gör du genom att gå till Infoga > Former > Rätvinklig triangel. Sedan kan välja önskad färg på triangeln genom att markera den och gå till fliken Figurformat. Sedan kan välja en valfri färg för cellen som då kommer att visas bakom.

    /Niklas på Learnesy

    in reply to: Letarad #292087
    Niklas
    Keymaster

    Hej Houda,
    Aha, då förstår jag. Du kan stänga av dessa funktionaliteter för att justera skärm, ljusstyrka, volym osv med tangenterna ‘Fn’ + ‘FnLock’. FnLock är vanligtvis detsamma som Esc-knappen.
    /Niklas på Learnesy

    in reply to: Duplicera och referera #291742
    Niklas
    Keymaster

    Hej Ida,
    Du har helt rätt, vi har råkat kasta om alternativen i frågan.

    Tack för detta, jag ska ändra det.
    /Niklas på Learnesy

Viewing 15 posts - 1 through 15 (of 82 total)